A lot of people use power tools for DIY projects at home and on construction sites. For people who are familiar with them, using any power tools machine makes their jobs much easier, and it becomes second nature to them. This is why most people prefer them even when most power tools price quite high. Unfortunately, a lot of people also tend to overlook the hazards they pose.
Thousands of people end up in emergency rooms due to accidents while using power tools. Usually, these mishaps occur because people rarely pay attention to the safety precautions required to take before these tools. Even though misuse of the tools causes accidents, most happen because they do not wear safety gear.
Accidents of these can be easily avoided if users recognize potential hazards and take necessary precautions. Here is a power tools safety checklist that everyone can use to ensure their safety while they work with their selection of power tools.
Dress right and wear all safety equipment.
Avoid wearing loose-fitting clothes, jewelry, or neckties. Use non-slip boots. If you have long hair, tie them up so that they do not hinder your concentration. Remove any dangling objects.
Purchase necessary safety equipment with your power tools. If you do not know what the hazards are, use a PPE kit. But the main safety accessories you need to have are a helmet, safety glass, and good-quality gloves.
Read the manual thoroughly. Be cautious when you use them
All power tools come with instruction manuals and a list of hazards to beware of. Make sure you read it thoroughly because a single slip can have life-altering consequences. Get to know your tool before using it in high-risk situations.
Be careful when you work with power tools. Turn them off immediately after use. If they are on, keep your hands away from the trigger. Keep the wires of your equipment away from sharp edges and heat sources.
Ground your tools. If you are working in damp locations, keep your hands and equipment dry. Put a rubber sheet on the ground and place a wooden stool on it. Work by sitting on the stool to prevent electric shocks.
Make sure you have a firm grip on the power tools. Do not use a tool that is heavy for you. Losing control of the equipment can cause many serious damages.
Keep your tools working efficiently. Inspect them regularly
Regular use causes wear and tear in all equipment. And using a damaged tool is a recipe for disaster. So make sure you inspect all your power tools – even the new ones regularly. Check them thoroughly for any type of damage like cracks, breakage, damaged plugs, exposed wires, etc to replace or repair them before causing any damage.
Keep your workspace clean
A hazardous work area can result in major injuries. Cleaning your work area after your work is done can keep you out of harm’s way. Keep them away from flammable liquids. If you have kids, make the area childproof. Make sure all chords are organized to prevent tripping and other accidents.
Use proper lighting while working
If the light in your work area is not bright enough, you cannot see properly and in such cases, power tools can be deadly. If you don’t have enough lights, bring in additional ones until you can clearly see what you are doing.
Be calm and confident
Make sure you are calm and collected while working with tools. Doubting yourself while working can lead to accidents too.
Anybody who has come across power tools will agree that they are faster, easier and more efficient. But different power tool selection brings with it a different set of risks and hazards. And if you are not aware of them fully, accidents are bound to happen one way or the other.
So make sure you know everything there is to know about charging and using the device. Turn your power tools when you are not using them. Read the manual and follow it to a T. Keep your tools neat and clean. Inspect them regularly and get any damages fixed. Make sure your workspace is clean and ready to use. Always be confident in your skillset.